VCM2 JLR Diagnostic tool for LandRover V138
u JLR Approved device
u Replacement for JLR SDD VCM
u Covers CAN, & ISO9141 vehicle networks
u Most cost effective Land Rover pass-thru
u Best suited for current and future vehicles
u 12ft USB cable as standard included
u Easy to update for J2534 new functionality
Jaguar & Land Rover Vehicle Coverage
Range Rover Sport & New Range Rover Sport
New Range Rover
XJ – X300/X308
XJ - X350
XJ - X351
XK – X100
XK - X150
(Yes) – Vehicle line fully supported:
(Yes*) - Vehicle line fully supported apart from viewing Data logger
signals from both ECM and TCM
modules simultaneously on 2006MY variants :
(No) - Vehicle Line Not supported
What does the VCM2 for Land Rover do?
TheVCM2 for Land Rover connects directly to the vehicle OBDII
(diagnostic) connector and then to a laptop via a USB cable for use
with SDD. Once the J2534 DLL files are loaded, this product will
allow normal operation with the JLR SDD diagnostic tool.
The device is designed as a replacement pass-through vehicle
communications device that can be used for the majority of the JLR
SDD diagnostic applications. Only SCP communications are not
possible with this device.
How does the VCM2 for Land Rover operate in J2534 mode?
TheVCM2 for Land Rover device is simple and easy to use.
l Please read the user manual firstly before using, install the
software after watching the video or user manual in the DVD.
l Connect the J2534 device to the vehicle OBDII connector (the
device powers from the vehicle).
l Connect the 12ft USB cable to the J2534 device and the other end
to the SDD laptop.
l The red vehicle power (PWR) LED will illuminate to show that the
device is powered.
l During communication with the vehicle the status (STS) LED will
l The device interacts with the SDD diagnostic tool in the same way
as the existing VCM.